bidsite.blogg.se - 240 volt receptacle

#240 volt receptacle how to#
#240 volt receptacle install#
#240 volt receptacle professional#

#240 volt receptacle professional#

This is a major electrical project that only a licensed electrical professional should handle. When everything is complete, turn on the power and test the 120/240 volt receptacle with your electric range. Tuck the wires into the box and screw on the receptacle faceplate.Here is how the wires are connected- white neutral wire to the neutral screw terminal, bare copper ground wire to the grounding screw terminal, black and red hot wires to the remaining terminals. Connect the cables to the receptacle box and be sure to tighten all the setscrews.The flush-mounted box falls within the wall while the surface-mounted box protrudes from the wall with rounded edges. There are two main options for this which are the flush-mounted box and the surface-mounted box.

#240 volt receptacle install#

Install the electrical box of the receptacle.

However, the receptacle should also be accessible to you. Also, ensure that the distance between the range and the receptacle is not so wide or long. Mark your receptacle spot on the wall behind the range and several inches above the ground. Typically, the range should be plugged from behind or at the side in rare cases.

Decide on the position of the receptacle following the current location of the range.

When the power cord has been attached and the 240-volt circuit breaker is installed, turn off power to the circuit to complete the wiring.

Wiring a 120/240 volt receptacle for an electric range starts with the tips above.

The tools needed for completing this wiring project include the receptacle, screwdrivers, electrical box, wire cutters and cable.

If the range does not come with a power cord, you have to buy one separately and connect the cord yourself.

The circuit will be wired with three-wire cables that are white, black, red, and then an additional bare copper ground wire. You will need to check the rating of the appliance to be sure of this.

Ensure that the circuit has sufficient amperage to supply power to the range.

Run a 240-volt circuit from the circuit breaker to the location of the receptacle before anything else.

Important tips for wiring a 120/240 volt receptacle for an electric range

#240 volt receptacle how to#

A professional and licensed electrician knows how to handle such projects with little or no stress on you. This is hardly a do-it-yourself project because wiring mistakes can cause fire, injury, or damage to the stove. Hence the 120/240 volt circuit and receptacle works by providing a neutral wire which in turn provides a return path for the 120 volt current in the circuit. But the 240-volt circuit serves a special purpose to heat up coils and heating elements with its increased power.

It uses the 120-volt circuit in the same way other household appliances do.

An electric range requires a 120/240 volt outlet to heat up its elements and work efficiently. You can’t plug them into a 120V outlet which is most common in homes. An electric range (stove) is one of the few power-hungry appliances in the home.